Electrical | Camburg Engineering https://camburg.com High Performance Offroad Suspension Wed, 06 Sep 2023 21:22:17 +0000 en-US hourly 1 https://wordpress.org/?v=6.3.1 https://camburg.com/wp-content/uploads/2019/12/cropped-favicon-32x32.png Electrical | Camburg Engineering https://camburg.com 32 32 Switch-Pros Ford Bronco 21-23 SP9100/RCR-12 Mounting Kit https://camburg.com/shop/accessories/electrical/switch-pros-ford-bronco-21-23-sp9100-rcr-12-mounting-kit/ Wed, 06 Sep 2023 21:19:55 +0000 https://camburg.com/?post_type=product&p=74664
  • For Switch-Pros SP-9100 & RCR-12 systems
  • Easy bolt-on design
  • Made in the USA
    • The post Switch-Pros Ford Bronco 21-23 SP9100/RCR-12 Mounting Kit first appeared on Camburg Engineering.]]>     Here’s an easy and clean way to mount the Switch-Pros 9100 or RCR Force 12 system in 2021-2023 Ford Bronco.

    This positions the switch panel above Driver’s grab handle and locates the PDM module engine bay area. This includes switch panel bracket, power module bracket, 5.5′ communications cable, and mounting hardware.

    CAProp65

    The post Switch-Pros Ford Bronco 21-23 SP9100/RCR-12 Mounting Kit first appeared on Camburg Engineering.]]>         ORR Ford Raptor 21-23 | Bronco Raptor 22-23 Damper Interface Device https://camburg.com/shop/accessories/electrical/orr-ford-raptor-21-damper-interface-device/ Fri, 30 Jun 2023 17:59:03 +0000 https://camburg.com/?post_type=product&p=73727
  • Plug & Play technology
  • Made in the USA
    • The post ORR Ford Raptor 21-23 | Bronco Raptor 22-23 Damper Interface Device first appeared on Camburg Engineering.]]>     For Ford 2021-2023 Raptors and 2022-2023 Bronco Raptors, this damper interface device allows you to install non Live Valve electronic controlled coilovers and shocks.  The Damper Interface Device (DID) eliminates the Terrain Management system fault warnings that occur when you disconnect the OE semi-active dampers.  The DID allows you to maintain your drive modes (Normal, Sport, Baja, Mud, Sand, Snow) which are integral to the truck’s integrated powertrain and chassis electronic systems.

    This plug & play device is easy to install and requires no modifications.

    • Durable, Lightweight E-Coated A308 Aluminum Enclosure
    • Replaces the Factory Ford Module using the same mounting points and fasteners.
    • Direct Plug and Play Installation
    • VIN Locked for security and transferrable by owner at any time at zero cost
    • Bluetooth (BLE) Enabled for Future-Proof Over-the-Air Firmware Updates via the ORRSRCH Mobile App
    • Easy 5-minute Install

    Fits these models only …

    • 2021-2023 Raptor
    • 2023 Raptor R
    • 2022-2023 Bronco Raptor
    • 2023 Ranger Raptor

    CAProp65

    The post ORR Ford Raptor 21-23 | Bronco Raptor 22-23 Damper Interface Device first appeared on Camburg Engineering.]]>         Scosche PowerUp 32K Portable Power Station https://camburg.com/shop/accessories/electrical/scosche-powerup-32k-portable-power-station/ Thu, 13 Apr 2023 21:32:16 +0000 https://camburg.com/?post_type=product&p=72807 Here’s the ultimate power setup when you’re looking to be off the grid for a while or in an emergency. We’ve used Scosche’s PowerUp 32K to run our Starlink internet satellite along with charging our full arsenal of media equipment like laptops, cameras, lights and drones. Get long lasting portable charging power when you need

    Read More "Scosche PowerUp 32K Portable Power Station"

    The post Scosche PowerUp 32K Portable Power Station first appeared on Camburg Engineering.]]>     Here’s the ultimate power setup when you’re looking to be off the grid for a while or in an emergency. We’ve used Scosche’s PowerUp 32K to run our Starlink internet satellite along with charging our full arsenal of media equipment like laptops, cameras, lights and drones.

    • Get long lasting portable charging power when you need it from the 32,000 mAh/116.8Wh Lithium-Ion battery with 110V AC output. The battery in the station is also conveniently pre-charged at approximately 75% to get you started right out of the box.
    • Power up to 4 devices at once. Charge a laptop using the standard wall plug outlet (110AC/100W Output), along with two USB Type-C devices from the 30W & 20W USB-C ports, and one standard USB device from the 12W (2.4A) USB-A port.
    • The AC switch turns on/off the AC output, 100W inverter and the internal fan. The USB switch turns on the USB Type-A and Type-C ports. Push both switches to turn the AC plug outlet and 3 USB ports on/off at the same time.
    • Use the PowerUp 32K with mobile phones, iPhone, Samsung Galaxy, Google Pixel, portable electronic devices, cameras, small fans, drones, portable gaming devices and more.
    • The easy-to-read digital display indicates exactly where the current battery percentage is at so you easily know when it needs to be recharged.
    • The PowerUp 32K is built with a rugged, protective rubberized coating on the outside to keep it protected during use.

    Works with: Portable electronic devices, cameras, small fans, drones, portable gaming systems and more!

    Specifications:

    • 110V: AC Output
    • USB-C: 30W Power Delivery input and output
    • USB-C: 20W Power Delivery output
    • USB-A: 12W Output

    CAProp65

    The post Scosche PowerUp 32K Portable Power Station first appeared on Camburg Engineering.]]>         Scosche PowerUp 700 Portable Jump Starter – Battery Backup https://camburg.com/shop/accessories/electrical/scosche-powerup-700-portable-jump-starter-battery-backup/ Thu, 13 Apr 2023 20:22:51 +0000 https://camburg.com/?post_type=product&p=72805 Run your stereo or lights too long and kill your battery? Scosche’s PowerUp 700 is the solution for those mishaps or to help someone else out on the trail or highway. The PowerUp 700 is not only a portable jump starter, but you can also use it as a battery backup to charge your laptop,

    Read More "Scosche PowerUp 700 Portable Jump Starter – Battery Backup"

    The post Scosche PowerUp 700 Portable Jump Starter – Battery Backup first appeared on Camburg Engineering.]]>     Run your stereo or lights too long and kill your battery? Scosche’s PowerUp 700 is the solution for those mishaps or to help someone else out on the trail or highway. The PowerUp 700 is not only a portable jump starter, but you can also use it as a battery backup to charge your laptop, phone and other accessories when you’re off the grid. This works great for cars, trucks, RV’s and boats and has plenty of power for those big diesel engines.

    • High-Capacity 15,000mAh Lithium-ion Battery w/700 Amp Peak
    • Jump Start Vehicles up to 10 Cylinders
    • Spark-Free, 6-Point Safety Protection System
    • Dual 5V (2.1A + 1.1A) USB Ports for Charging Mobile Devices
    • Safety Protection against Short Circuit, Reverse Connection, Polarity, & More
    • Ultra-Bright LED Flashlight
    • 1000+ Charge / Discharge Cycle
    • Backwards Compatible to work with smaller engines
    • LED Battery Power Level Indicator
    • Works great on cars, trucks, boats, ATV/UTVs and more

    Specifications

    • High-Capacity 15,000 mAh Lithium-ion Battery
    • Peak Jumpstar Current of 700 Amps
    • Works on Engines up to 10 Cylinders
    • Spark-Free, 6-Point Safety Protection
    • Safety Protection Against Short Circuit, Reverse Connection & More
    • Dual USB Charge Ports for Smartphones, Tablets & More
    • Ultra-Bright LED Flashlight
    • Front Panel Battery Level Indicator
    • Holds Charge for up to 12 months
    • 1000+ Charge / Discharge Cycle

    CAProp65

    The post Scosche PowerUp 700 Portable Jump Starter – Battery Backup first appeared on Camburg Engineering.]]>         Switch-Pros Jeep Wrangler JL 18-23 | Gladiator JT 20-23 SP9100 Mounting Kit https://camburg.com/shop/accessories/electrical/switch-pros-jeep-jl-18-jt-20-sp9100-mounting-kit/ Tue, 07 Apr 2020 04:05:45 +0000 https://camburg.com/?post_type=product&p=55699
  • Fits Wrangler JL & Gladiator JT
  • For Switch-Pros SP-9100 system
  • Easy bolt-on design
  • Made in the USA
    • The post Switch-Pros Jeep Wrangler JL 18-23 | Gladiator JT 20-23 SP9100 Mounting Kit first appeared on Camburg Engineering.]]>     Here’s an easy and clean way to mount the Switch-Pros 9100 system in your Jeep Wrangler (JL) or Gladiator (JT). This is the same mount used in our Jeeps Only Sig Sauer Gladiator build.

    This positions the switch panel under the driver’s side grab handle and locates the PDM module on the passenger side engine bay area. The kit includes the power module mounting plate, switch panel bracket, and replacement cap to match factory grab handle.

    CAProp65

    The post Switch-Pros Jeep Wrangler JL 18-23 | Gladiator JT 20-23 SP9100 Mounting Kit first appeared on Camburg Engineering.]]>         ORR Ford Raptor 19-20 Damper Interface Device https://camburg.com/shop/accessories/electrical/orr-ford-raptor-19-20-damper-interface-device/ Wed, 04 Dec 2019 23:48:00 +0000 http://camburg.com/?post_type=product&p=54125
  • Plug & Play technology
  • Made in the USA
    • The post ORR Ford Raptor 19-20 Damper Interface Device first appeared on Camburg Engineering.]]>     For 2019-2020 Ford Raptors, this damper interface device allows you to install non Live Valve electronic controlled coilovers and shocks. The Damper Interface Device (DID) eliminates the Terrain Management system fault warnings that occur when you disconnect the OE semi-active dampers.  The DID allows you to maintain your drive modes (Normal, Sport, Baja, Mud, Sand, Snow) which are integral to the truck’s integrated powertrain and chassis electronic systems.

    This plug & play device is easy to install and requires no modifications. It installs in the driver-side kick panel area in less than 5 minutes.

    CAProp65

    The post ORR Ford Raptor 19-20 Damper Interface Device first appeared on Camburg Engineering.]]>         Switch-Pros RCR-Force 12 Switch Panel Power System https://camburg.com/shop/utv/accessories-utv/switch-pros-rcr-force-12-switch-panel-power-system/ Thu, 21 Nov 2019 05:22:33 +0000 http://camburg.com/?post_type=product&p=53982
  • RGB Backlighting provides unlimited color options
  • Twelve user-programmable switches
  • Programming and control via panel or smart phone
  • Bluetooth interface
  • 150A solid state power module, engine compartment rated
    • The post Switch-Pros RCR-Force 12 Switch Panel Power System first appeared on Camburg Engineering.]]>     COMING EARLY 2020 ! 

    • 12 user-programmable switches
    • RCR-TOUCH™ switch cover
    • Waterproof, solid state power module
    • 150amp capacity with 17 outputs
      • 4 rated @ 35A and 1 rated @ 30A
        (High In-Rush circuits)
      • 11 rated @ 15A, which can be combined for larger loads
      • 1 Low Side driver switch, rated @ 2A
    • Built-in Bluetooth module
    • Program and operate accessories with phone or tablet
    • System can be used to start vehicle

    Switch Panel Specs:

    • RCR-Touch™ cover, snaps on for ease of specific switch selection while wearing gloves or riding rough terrain
    • Switch Panel enclosure measures
      4” L x 3” W x .375” H
    • Splash proof with Polycarbonate overlay faceplate
    • Pre-machined for factory- look installation
    • RGB backlighting
    • Orange LED switch indicators
    • 6 Programmable LED Status indicators

    POWER MODULE SPECS: 

    • 17 Outputs: 4 rated @ 35A, 1 rated @ 30A, 11 rated @15A, 1 Low Side rated @ 2A
    • 150A maximum rating
    • 7”L x 3.5”W x .5”H (excluding connectors)
    • Waterproof and Solid State
    • Underhood rated 125° to -40°C
    • LED Ignition Input Status Indicator

    KIT INCLUDES:

    • 11’ of Communication Cable between Switch Panel and Power Module
    • Power Cable with 150A inline Circuit protection
    • 100 User Selectable Legends included (Horizontal orientation)
    • Installation brackets and hardware
    • Color Coded Output wires
    • Wire harness with waterproof, sealed automotive grade connectors

    SWITCHES CAN BE PROGRAMMED FOR:

    • Preset Dimming function WITH MEMORY (100% to 10% brightness)
    • Master Mode, with ability to turn multiple outputs On AND Off with one touch
    • Every Master Switch can control up to 4 other switch outputs
    • On-On-Off logic
    • Touch Panel lockout
    • On/Off or Momentary
    • Ignition or Battery Input
    • Flash or Strobe, with User-Selectable Strobe patterns and One Touch activation
    • Automatic Power-Up upon vehicle start up
    • Safety Lockout for specific switches
    • Time Delay off

    ADDITIONAL FEATURES:

    • No bulky relay box
    • RGB Backlighting with unlimited color options
    • Three External Trigger inputs can each activate up to four outputs (Active Hi or Active Low)
    • Sleep Mode for minimal power consumption
    • Color coded output wires
    • Daisy Chain up to 3 Switch Panels to One Power Module
    • Free app for iOs and Android platforms
    • Splash proof switch panel with Polycarbonate overlay faceplate
    • LED Input Status Indicators for easy troubleshooting
    • Battery Voltage Readout on App screen
    The post Switch-Pros RCR-Force 12 Switch Panel Power System first appeared on Camburg Engineering.]]>         Switch-Pros SP-9100 Switch Panel Power System https://camburg.com/shop/utv/accessories-utv/switch-pros-sp-9100-switch-panel-power-system/ Thu, 25 Jan 2018 05:45:49 +0000 http://camburg.com/?post_type=product&p=47934
    • RGB Backlighting provides unlimited color options
    • Eight user-programmable switches
    • Programming and control via panel or smart phone
    • Bluetooth interface
    • 125A solid state power module, engine compartment rated
    The post Switch-Pros SP-9100 Switch Panel Power System first appeared on Camburg Engineering.]]>
  • Eight user-programmable switches
  • Four 35A circuits and four 18A circuits
  • Waterproof, Solid State 125A Power Module
  • RGB Backlighting provides unlimited color options, using Color Picker on App
  • Daisy Chain up to 3 Switch Panels to One Power Module
  • Switches can be programmed for:
  • On/Off or Momentary
  • Ignition or Battery Input
  • Flash or Strobe, with User-Selectable Strobe patterns and One Touch activation
  • Memory Function
  • Master Mode, with ability to turn multiple outputs On AND Off with one touch
  • Automatic Power-Up upon vehicle start up
  • Two External trigger inputs can each activate up to four outputs (Active Hi or Active Low)
  • Lighting outputs can dim from 100% to 10%, with ability to dim during Flash or Strobe patterns
  • Sleep Mode for minimal power consumption
  • Color Coded circuit wires
  • 100 User-selectable switch legends
  • LED Input Status Indicators for easy troubleshooting
  • Time Delay Off function available for all circuits
  • Splash proof switch panel with Polycarbonate overlay faceplate
  • Program and control the system from switch panel pad or smart phone
  • Bluetooth interface with FREE Apple or Android App
  • Battery Voltage Readout on App screen
  • No Fuses or Bulky Relay box
  • Built-In Bluetooth Module

    • Switch Panel Specs:

    • RGB Backlighting provides unlimited color options, allows for exact matching to factory dash lighting
    • Built-In Bezel Style Switch Panel enclosure measures 4” L x 2” W x .375” H ; includes concealed mounting hardware for factory-look installation
    • Orange LED switch indicators
    • 100 User Selectable Legends

    Power Module Specs:

    • 8 Outputs: 4 rated @ 35A, 4 rated @ 18A
    • 125A maximum rating
    • Waterproof and Solid State
    • 6”L x 3”W x .5”H (excluding connectors)
    • LED Input Status Indicators for easy troubleshooting
    • Underhood rated 125° to -40°C

    Kit Also Includes:

    • 11’ of Communication Cable between Switch Panel and Power Module
    • Color Coded Output wires
    • Wire harness with Waterproof, sealed automotive grade connectors
    • Power Cable with 125A inline fuse

     

    Switches can be programmed to be: On/Off or Momentary, ignition or battery powered, flash, strobe, low voltage disconnect, and memorize previous settings.  There is also a programming function to adjust the brightness of backlighting and indicator LEDs.

    CAProp65

    The post Switch-Pros SP-9100 Switch Panel Power System first appeared on Camburg Engineering.]]>         Camburg Stainless Steel PC925 Battery Box https://camburg.com/shop/accessories/electrical/battery-boxes/camburg-stainless-steel-pc925-battery-box/ Wed, 06 Nov 2013 20:51:32 +0000 https://camburg.com/?post_type=product&p=21795
    • 304 Stainless steel
    • Laser cut
    • Tig-welded
    • Bolt-on or weld-on  mounting
    • Fits Odyssey PC-925 Batteries only
    The post Camburg Stainless Steel PC925 Battery Box first appeared on Camburg Engineering.]]>
    • 304 Stainless steel
    • Laser cut
    • Tig-welded
    • Bolt-on or weld-on  mounting
    • Fits Odyssey PC-925 batteries only

    Battery Dimensions

    Length 6.60 in
    Width 7.10 in
    Height (container) 5.00 in
    The post Camburg Stainless Steel PC925 Battery Box first appeared on Camburg Engineering.]]>         Camburg Stainless Steel PC1500 Battery Box https://camburg.com/shop/accessories/electrical/battery-boxes/camburg-stainless-steel-pc1500-battery-box/ Tue, 05 Nov 2013 20:09:17 +0000 https://camburg.com/?post_type=product&p=21790
    • 304 Stainless steel
    • Laser cut
    • Tig-welded
    • Bolt-on or weld-on  mounting
    • Fits Odyssey PC-1500 Batteries only
    The post Camburg Stainless Steel PC1500 Battery Box first appeared on Camburg Engineering.]]>
    • 304 Stainless steel
    • Laser cut
    • Tig-welded
    • Bolt-on or weld-on  mounting
    • Fits Odyssey PC-1500 Batteries only

    Battery Dimensions

    Length 10.90 in
    Width 6.80 in
    Height (container) 7.30 in
    The post Camburg Stainless Steel PC1500 Battery Box first appeared on Camburg Engineering.]]>