The MagnaFlow Ford F-150 Raptor R xMOD Series Cat-Back Performance Exhaust System is an ultimate exhaust upgrade that can be transformed to your liking to create the exact tone you’re looking for, all while empowering your 2023 Ford F-150 Raptor R with dyno-proven performance gains. This feat is accomplished while retaining the full functionality of your truck’s controllable exhaust valves. Exhaust kit #19651 features 3” mandrel bent main piping that replaces your OEM exhaust from near the catalytic converter on back. The piping passes through a set of either 11” NDT (No Drone Technology) muffler modules or 11” xTreme Delete straight pipe modules before passing through the controllable valves and an X-pipe with branch pipe mid-connection and terminating in a dual split rear exit with 5” double-wall angle cut rolled edge black coated tips. #19651 also includes front pipes that can be used to replace the factory front resonated pipes. The NDT muffler modules each include a round straight-through performance muffler connected to an 11” NDT reflection chamber that’s tuned to minimize the droning noises that can otherwise occur at cruising speeds. Meanwhile, the xTreme Delete modules turn your exhaust into a full-throated straight-pipe setup, perfect for track or off-road use. The xTreme Delete modules are the real deal though, so please check to ensure compliance with local noise regulations. This exhaust system is secured with racing-bred quick release V-band clamps, which facilitate easy installation and make swapping modules quick and hassle free. Each of these exhaust kits is produced using advanced CNC precision robotic manufacturing techniques and is made of durable, corrosion resistant stainless steel, all backed by MagnaFlow’s limited lifetime warranty.

• All Mandrel Bent Tubing
• 409 Stainless Steel Construction with High Temp Satin Black Coating
• Increased Horsepower and Torque
• 1 Year Warranty on Finish, Lifetime Construction
• Made in USA
• For Raptor R models only

FITS 6.2L V8 ENGINE MODELS ONLY

The MagnaFlow Chevrolet Silverado 1500/GMC Sierra 1500 Overland Series Cat-Back Performance Exhaust System #19626 is engineered to enhance the off-road capabilities, performance and sound of your 2019-2023 Chevy Silverado 1500 or GMC Sierra 1500 equipped with the 6.2L engine option. The high clearance design of this exhaust kit increases your rig’s capacity to traverse any sort of terrain, while the incorporation of an NDT (No Drone Technology) resonator helps mitigate the droning frequencies that can otherwise occur at highway cruising speeds. #19626 features 3.5” diameter main piping that passes through an 18” oval bodied straight-through muffler and 14” NDT reflection chamber before terminating in a dual split rear exit with high clearance tailpipes. Exhaust kit #19626’s easy-to-install direct-fit design is engineered to replace all of your truck’s stock exhaust components from near the catalytic converter on back. This Chevrolet Silverado 1500/GMC Sierra 1500 performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime warranty.

• Easy bolt-on installation
• All Mandrel Bent Tubing
• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Lifetime Construction Warranty
• Made in USA

• Easy bolt-on installation
• All Mandrel Bent Tubing
• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Lifetime Construction Warranty
• Made in USA

The MagnaFlow Ford Bronco Raptor Overland Series Cat-Back Performance Exhaust System #19619 brings all the technology, dyno-proven performance and configurable sound your truck needs to be crowned the ultimate Raptor. This exhaust kit is compatible with every 2022-2023 Ford Bronco Raptor running a 3.0L engine and features an easy-to-install direct-fit design that replaces your truck’s OEM exhaust system from near the catalytic converter on back. #19619 features high clearance tucked 3” diameter mandrel bent main piping that passes through two 11” round body straight-through mufflers and NDT (No Drone Technology) resonators, effectively mitigating any droning noises that may otherwise occur when cruising at highway speeds. The tucked design also considerably improves both ground clearance and departure angles. This Ford Bronco Raptor performance exhaust system terminates in a dual same-side driver-side rear exit and includes integrated, functional active exhaust valves cast in durable 304 stainless steel. Exhaust kit #19619 is secured using racing-bred quick-release V-band clamps. #19619 is made of durable stainless steel and produced using advanced 3D scanning technology and CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime warranty.

• Easy bolt-on installation
• All Mandrel Bent 3″ Tubing
• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Lifetime Construction Warranty
• Made in USA

FITS 3.5L V6 ENGINE MODELS ONLY

The MagnaFlow Toyota Sequoia Overland Series Cat-Back Performance Exhaust System #19625 offers the improved off-road capabilities, higher ground clearance, dyno-proven performance and signature MagnaFlow sound necessary to turn your 2023 Toyota Sequoia into the ultimate overlanding vehicle. #19625’s direct-fit design is easy to install and replaces your SUV’s stock exhaust components from near the catalytic converter on back. This Toyota Sequoia exhaust system features 3” mandrel bent main piping that passes through a 22” oval bodied muffler and 11” round bodied muffler in addition to an NDT (No Drone Technology) reflection chamber before ending in a high clearance, tucked black-coated tailpipe to the rear of the driver’s side. The integration of MagnaFlow’s NDT technology means that droning noises at highway cruising speeds are kept to a minimum. One of the system’s mufflers features an accessory port, where various included modules can be attached to further augment your rig’s engine sound. An additional NDT resonator module can be attached for further droning reduction in various frequency ranges, or the port can be covered with the included pipe cap for a more traditional MagnaFlow exhaust sound. Together with the included J-pipe module, these attachments can be combined in various configurations to tune out a variety of different droning frequencies. The high clearance nature of the design and tucked exit of this system means both improved ground clearance and departure angles for superior off-road performance. This performance exhaust kit is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime warranty.

• Easy bolt-on installation
• All Mandrel Bent 3″ Tubing
• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Lifetime Construction Warranty
• Made in USA

The MagnaFlow Ford F-150 Raptor xMOD Series Performance Exhaust System brings your already anabolic truck to the next level with our most advanced exhaust innovations, dyno-proven performance gains and signature deep exhaust tone. Key among these improvements is the system’s modular nature, which allows you to switch between a drone-free NDT (No Drone Technology) mode and a straight-pipe inspired sound (thanks to the xTreme Delete module) quickly and easily with only a few turns of a standard wrench. Heavy duty bracketed hangers support the entire exhaust while you’re swapping modules, thus ensuring this kit will last as long as your truck does. It also utilizes cast 304 stainless steel active exhaust valves that are engineered to work with your F-150’s active exhaust option. It features a direct-fit design that integrates seamlessly into your 2021+ Ford F-150 Raptor and the exhaust system of its 3.5L V6 twin-turbocharged powerplant, enabling a hassle-free do-it-yourself installation process. The 3 in. mandrel bent main piping of this Raptor exhaust system is secured with racing-bred V-band clamps and passes through a specially designed, Raptor-specific X-pipe with an integrated mid-pipe loop before terminating in a dual split rear exit with black double-walled powder coated 5” tips. Advanced CNC precision robotic manufacturing techniques and the extensive use of 3D scanning during development are used to ensure perfect fitment and flawless system performance. The durable stainless-steel construction of #19587 is backed by MagnaFlow’s limited lifetime construction warranty and one-year finish warranty.

• All Mandrel Bent Tubing
• 409 Stainless Steel Construction with High Temp Satin Black Coating
• Increased Horsepower and Torque
• 1 Year Warranty on Finish, Lifetime Construction
• Made in USA
• Not for Raptor R models

The MagnaFlow Toyota Tundra Street Series Performance Exhaust System #19603 takes your rig to the next level with a healthy helping of dyno-proven performance and our signature exhaust tone. Exhaust kit #19603 features a cat-back layout engineered to replace your stock exhaust components from near the catalytic converter on back. This Tundra exhaust system’s 3” diameter, fast-flowing mandrel bent main piping passes through a straight-through 5”x11”x22” center/offset muffler before terminating in a 3.5” dual same-side behind driver rear tire exit with black coated tips. The direct-fit design enables easy, do-it-yourself installation and is compatible with all crew cab and extended cab/standard bed configurations of the 2022 Toyota Tundra equipped with the 3.5L V6 engine option. #19603 is made of durable stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime warranty

• Easy bolt-on installation
• All Mandrel Bent 3″ Tubing
• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Lifetime Construction Warranty
• Made in USA

FITS 2.3L L4 ENGINE MODELS ONLY

The MagnaFlow Ford Ranger Overland Series Performance Exhaust System #19605 helps your truck conquer trails and obstacles that stock systems simply can’t thanks to the improved ground clearance and departure angles it brings to compatible 2019-2022 Ford Ranger models equipped with the 2.3L inline-four engine option. This improved off-road capability is largely thanks to the system’s undercarriage hugging design and tipless exit. Exhaust kit #19605 features 3” diameter, fast flowing, mandrel bent main piping that passes through a straight-through offset/offset same-side 5”x8”x18” muffler before ending in a tipless, high tuck tailpipe that exits on the rear of the passenger’s side. This Ranger exhaust system replaces all your truck’s stock exhaust components from near the catalytic converter on back, enhancing it with MagnaFlow’s signature sound and dyno-proven performance while keeping unwanted droning noises under control both on and off the trail thanks to the incorporation of our NDT (No Drone Technology) resonators. #19605 is made of durable, corrosion-resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime warranty.

• Easy bolt-on installation
• All Mandrel Bent 3″ Tubing
• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Lifetime Construction Warranty
• Made in USA

FITS 3.5L V6 ENGINE MODELS ONLY

The MagnaFlow Toyota Tundra Overland Series Performance Exhaust System #19604 is built to withstand anything that Mother Nature throws at it thanks to the elevated ground clearance and superior departure angles it offers compared to your truck’s existing exhaust system. #19604 makes this all possible thanks to its single tipless, high tuck tailpipe that exits the rear driver’s side. The system’s cat-back design replaces all of your truck’s stock exhaust components from near the catalytic converter on back. Our innovative NDT (No Drone Technology) resonators are engineered to keep droning noises in check using quarter-wave passive noise cancellation, improving your situational awareness while out on the trail and facilitating a more comfortable ride when cruising the highway. Exhaust kit #19604 is compatible with all 2022 Toyota Tundra crew cab and extended cab/standard bed configurations equipped with the 3.5L V6 engine option. #19604 features 3” diameter, mandrel-bent main tubing that flows through a fast-flowing, straight through 5”x11”x22” offset/offset same-side muffler with internal branch pipe, all with a premium brushed finish. This Toyota Tundra performance exhaust system is made of durable, corrosion-resistant stainless steel and produced using advanced, CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime warranty

• Easy bolt-on installation
• All Mandrel Bent 3″ Tubing
• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Lifetime Construction Warranty
• Made in USA

The NEW Overland Series Exhaust system provides the performance and versatility your off-road adventures demand.  Specially designed with high ground clearance in mind, considerations include relocating the muffler to be above the bottom of the frame and chassis, as well as having a no-tip exhaust exit tucked up close to the body and away from potentially perilous obstacles. Combined with robust stainless steel construction to withstand the toughest terrain. All Overland Series products have been specifically tuned to be comfortable for long drives while still bringing out the unique character of your rig.

As with other exhaust systems in the series, the new Overland Series performance exhaust systems utilize Helmholtz and quarter-wave noise cancellation as part of MagnaFlow’s No Drone Technology (NDT) to keep low-rpm noise under control.

• Easy bolt-on installation
• All Mandrel Bent 2.5″ Tubing
• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Lifetime Construction Warranty
• Made in USA
• Does not fit the Bronco Raptor