Brake Lines | Camburg Engineering

Camburg Ford Ranger Edge 2wd 01-12 6.0 Front Brake Line Kit

scott — Sat, 12 Mar 2022 18:01:35 +0000

These are the same brake lines we use in our Camburg 6.0 kit. They are extended in length, teflon-lined, stainless steel braided and kevlar reinforced with an additional protective covering. These are Made in the USA and not some cheap imports you find on ebay/Amazon. Our brake lines are made up of 5 layers for optimum strength and every single one is pressure tested. We know our brake lines are used in extreme conditions and are getting hit, pulled on, etc. off-road so we cut no corners. They come with everything you need and mount to the the factory calipers. These are 18″ in length. These are pressure tested to 4,500 psi and meet Federal D.O.T. MVSS-106 standards.

These fit 2wd Rangers with torsion bars only. For coil spring trucks use our 5.5 kit brake lines.

The post Camburg Ford Ranger Edge 2wd 01-12 6.0 Front Brake Line Kit first appeared on Camburg Engineering.

Camburg Ford Ranger 2wd 98-12 5.5 Front Brake Line Kit

scott — Sat, 12 Mar 2022 17:48:44 +0000

These are the same brake lines we use in our Camburg 5.5 kit. They are extended in length, teflon-lined, stainless steel braided and kevlar reinforced with an additional protective covering. These are Made in the USA and not some cheap imports you find on ebay/Amazon. Our brake lines are made up of 5 layers for optimum strength and every single one is pressure tested. We know our brake lines are used in extreme conditions and are getting hit, pulled on, etc. off-road so we cut no corners. They come with everything you need and mount to the the factory calipers. These are 21.5″ in length. These are pressure tested to 4,500 psi and meet Federal D.O.T. MVSS-106 standards.

These fit 2wd Rangers with coil springs only. For torsion bar trucks use our 6.0 kit brake lines.

The post Camburg Ford Ranger 2wd 98-12 5.5 Front Brake Line Kit first appeared on Camburg Engineering.

Camburg Toyota 4-Runner 2wd/4wd 03-23 Front Brake Line Kit

scott — Tue, 13 Apr 2021 17:27:09 +0000

These brakes lines are stock length and also what we use with our Camburg performance spindles. They are teflon-lined, stainless steel braided and kevlar reinforced with an additional protective covering. These are Made in the USA and not some cheap imports you find on ebay/Amazon. Our brake lines are made up of 5 layers for optimum strength and every single one is pressure tested. We know our brake lines are used in extreme conditions and are getting hit, pulled on, etc. off-road so we cut no corners. They come with everything you need to install them to the OEM mounts and fittings. They are 10.5″ in length. These are pressure tested to 4,500 psi and meet Federal D.O.T. MVSS-106 standards.

The post Camburg Toyota 4-Runner 2wd/4wd 03-23 Front Brake Line Kit first appeared on Camburg Engineering.

Camburg Toyota Tacoma Pre/4wd 05-23 Front Brake Line Kit

scott — Tue, 13 Apr 2021 17:23:57 +0000

The post Camburg Toyota Tacoma Pre/4wd 05-23 Front Brake Line Kit first appeared on Camburg Engineering.

Camburg Toyota Tundra 2wd/4wd 07-21 Front Brake Line Kit

scott — Tue, 13 Apr 2021 17:17:38 +0000

These brakes lines are stock length and also what we use with our Camburg performance spindles. They are teflon-lined, stainless steel braided and kevlar reinforced with an additional protective covering. These are Made in the USA and not some cheap imports you find on ebay/Amazon. Our brake lines are made up of 5 layers for optimum strength and every single one is pressure tested. We know our brake lines are used in extreme conditions and are getting hit, pulled on, etc. off-road so we cut no corners. They come with everything you need to install them to the OEM mounts and fittings. They are 15″ in length. These are pressure tested to 4,500 psi and meet Federal D.O.T. MVSS-106 standards.

The post Camburg Toyota Tundra 2wd/4wd 07-21 Front Brake Line Kit first appeared on Camburg Engineering.

Camburg Toyota Tundra 2wd/4wd 07-21 S/U Rear Brake Line Kit

scott — Mon, 12 Apr 2021 22:51:08 +0000

These extended brakes lines are designed for our rear spring under leaf spring kit. They are teflon-lined, stainless steel braided and kevlar reinforced with an additional protective covering. These are Made in the USA and not some cheap imports you find on ebay/Amazon. Our brake lines are made up of 5 layers for optimum strength and every single one is pressure tested. We know our brake lines are used in extreme conditions and are getting hit, pulled on, etc. off-road so we cut no corners. They come with everything you need to install them to the OEM mounts and fittings. These are 4″ longer than stock (18″ OAL). These are pressure tested to 4,500 psi and meet Federal D.O.T. MVSS-106 standards.

The post Camburg Toyota Tundra 2wd/4wd 07-21 S/U Rear Brake Line Kit first appeared on Camburg Engineering.

Camburg Ford F-250/350 4wd 17-23 Front Brake Line Kit

scott — Sat, 10 Oct 2020 03:09:35 +0000

These are the same brake lines we use in our performance kits. They are extended in length, teflon-lined, stainless steel braided and kevlar reinforced with an additional protective covering. These are Made in the USA and not some cheap imports you find on ebay/Amazon. Our brake lines are made up of 5 layers for optimum strength and every single one is pressure tested. We know our brake lines are used in extreme conditions and are getting hit, pulled on, etc. off-road so we cut no corners. They come with everything you need to install them to the OEM mounts and fittings. These are 33.5″ in length (3.5″ longer than stock). These are pressure tested to 4,500 psi and meet Federal D.O.T. MVSS-106 standards.

The post Camburg Ford F-250/350 4wd 17-23 Front Brake Line Kit first appeared on Camburg Engineering.

Camburg Toyota Tacoma Pre/4wd 96-04 L/T Front Brake Line Kit

scott — Sat, 03 Oct 2020 02:20:46 +0000

These are the same brake lines we use in our Camburg long-travel kit. They are extended in length, teflon-lined, stainless steel braided and kevlar reinforced with an additional protective covering. These are Made in the USA and not some cheap imports you find on ebay/Amazon. Our brake lines are made up of 5 layers for optimum strength and every single one is pressure tested. We know our brake lines are used in extreme conditions and are getting hit, pulled on, etc. off-road so we cut no corners. They come with everything you need and mount to the the factory calipers. These are 29″ in length. These are pressure tested to 4,500 psi and meet Federal D.O.T. MVSS-106 standards.

The post Camburg Toyota Tacoma Pre/4wd 96-04 L/T Front Brake Line Kit first appeared on Camburg Engineering.

Camburg Jeep Gladiator JT 20-23 Rear Brake Line Kit

scott — Thu, 16 Apr 2020 05:04:27 +0000

These extended brakes lines are designed for our 3″ lift suspension system. They are extended in length, teflon-lined, stainless steel braided and kevlar reinforced with an additional protective covering. These are Made in the USA and not some cheap imports you find on ebay/Amazon. Our brake lines are made up of 5 layers for optimum strength and every single one is pressure tested. We know our brake lines are used in extreme conditions and are getting hit, pulled on, etc. off-road so we cut no corners. They come with everything you need to install them to the OEM mounts and fittings. These are 23″ in length. These are pressure tested to 4,500 psi and meet Federal D.O.T. MVSS-106 standards.

The post Camburg Jeep Gladiator JT 20-23 Rear Brake Line Kit first appeared on Camburg Engineering.

Camburg Jeep Wrangler JL 18-23 | Gladiator 20-23 Front Brake Line Kit

scott — Sat, 22 Jun 2019 00:42:15 +0000

These extended brakes lines are designed for our 3″ lift suspension systems. They are extended in length, teflon-lined, stainless steel braided and kevlar reinforced with an additional protective covering. These are Made in the USA and not some cheap imports you find on ebay/Amazon. Our brake lines are made up of 5 layers for optimum strength and every single one is pressure tested. We know our brake lines are used in extreme conditions and are getting hit, pulled on, etc. off-road so we cut no corners. They come with everything you need to install them to the OEM mounts and fittings. The Wrangler Sport/Sahara are 38.5″ in length and the Wrangler Rubicon & Gladiator are 37″ in length. These are pressure tested to 4,500 psi and meet Federal D.O.T. MVSS-106 standards.

Select your model since brake lines are different between the Sport, Sahara & Rubicon.

The post Camburg Jeep Wrangler JL 18-23 | Gladiator 20-23 Front Brake Line Kit first appeared on Camburg Engineering.