Description
Super Lube® PTFE synthetic grease is the grease of choice to use for any polyurethane, delrin or composite bushings used in the suspension like upper control arms and leaf springs. It contains versatile water-proof, non-melting, high-temp teflon (PTFE) and is formulated to seal out water and to lubricate under the most adverse conditions. It’s superior adhesive and extreme pressure qualities, combined with it’s urethane compatibility makes it the one to use.
Many greases are not compatible with polyurethane, delrin or composite bushings and can actually cause squeaking and degrade them. Other greases will also require more frequent service as they will break down faster from the constant heat and friction.
We have these available in a standard 14oz. grease tube canister so you’re able to use a grease gun through zerk fittings as well as 14oz tub container if you want to manually brush/apply it to various bushings and surfaces.
When using a grease gun slowly add grease and on Toyota upper control arms or other model arms with washers up against the bushings, make sure to loosen the frame bolt slightly to allow the old grease and air to purge out. Then re-tighten to specs. If not, you will pressurize the bushing assembly and distort and/or damage the bushings.
We recommend greasing upper control arm bushings 2-3 times per year or every 5-8k miles depending on use. Higher frequency lubing may be required when used off-road and/or in wet/snow/mud conditions.
