Description

These are our fabricated 4″ lift spindles for the 2005-2023 2wd 6-lug Tacomas. These are a great solution for larger tires and factory ride or much need clearance for larger tires with our bolt in mid travel coilover or long Travel kits. Factory spindles are known for bending so this new design is much stronger than the factory units giving you strength needed for off road use. These spindles are CNC machined, fully fabricated, with an internally gusseted boxed design, 3/4″ wider per side to correct spindle offset as well as more tire clearance with upper arms. Our new steering arm angle will relieve binding on the factory outer tie rods at droop allowing for more wheel travel. You also gain ground clearance with the added lift built into the spindle.

We offer the spindle in two versions, one that incorporates the factory sway-bar mount for stock length upper & lower arms and our long-travel version that does not have the sway-bar mount, making it stronger. The stock brake lines for either version are too short. If you’re running these with our long-travel kit you will need longer brake lines than supplied. When ordering let us know if that’s the case so we can supply the correct versions.

Fully fabricated (not cheap cast imports)
CNC Machined
4 in Lift
3/4 in wider per side
Includes longer length stainless/kevlar front brake lines
Clearance for larger tires
Powder-coated finish
Fits 6 lug 2wd trucks only
Made in the USA

Driver side spindle
Passenger side spindle
Extended length stainless/kevlar front brake lines (CAM-330004) ** USE CAM-330002 with L/T Kits **
12pt Hardware Kit

Lift	Wheel Travel	Track Width	Wheel Size	Max Backspacing	Tire Size	Install Labor	Alignment Specs
4 in		+3/4 in per side		5.25 in		$650 + $185 align

Fits 6 lug 2wd model trucks only
If you’re running these with our long-travel kit you will need longer brake lines than supplied. When ordering let us know if that’s the case so we can supply the correct versions.
When increasing tire size from stock, we recommend a zero offset wheel (4.50-4.75″ backspacing) for added clearance. Stock wheels and tires fit correctly “as is”.
These are designed to replace the OEM stock parts, these will not work on drop-down bracket lift kits that replace the spindle/knuckle with a much taller version.
These also fit 2wd ’03-14 4-Runners and ’07-14 FJ’s with our uniball upper arms, not ball-joint arms.
With so many variables of wheel size, offset/backspacing, tire size, brands and styles, the amount of lift and specific suspension components, etc., you may need to trim the plastic inner fenders and/or modify the body mount behind the front tires to eliminate tire rubbing.