JKS Manufacturing | Camburg Engineering

JKS Ford Bronco 21-22 Max Tire Clearance Kit

scott — Tue, 07 Jun 2022 20:36:37 +0000

JKS builds on the capability of the new Ford Bronco with a new Max Tire Clearance Kit designed to optimize the front wheel-well to install larger tires on your stock height or lifted Bronco models. High strength body mount brackets improve clearance while allowing compatibility with stock and aftermarket “stubby” bumpers. This is an easy way to gain needed tire clearance when running bigger tires and off-roading to the Bronco’s true potential.

Heavy duty 3/16″ steel construction for body mount brackets
High clearance body mount provides a clean look with mid-width and stubby bumpers
Allows for larger tire fitment at all ride heights – Max tire size is dependent on lift height.
Full clearance through wheel travel at 2-4″ of lift with 37×12.50 tires (4.75-5″ backspacing recommended)
Can be installed at any ride height, max tire size dependent on suspension system height

The post JKS Ford Bronco 21-22 Max Tire Clearance Kit first appeared on Camburg Engineering.

JKS Jeep Wrangler JK 12-18 Exhaust Extension Kit

scott — Fri, 04 Jun 2021 17:25:32 +0000

A JKS Exhaust Extension Kit is required for proper driveshaft clearance after installing a lift kit on your 2012-2018 Jeep Wrangler JK. When installed, this kit adds clearance between the front driveshaft and the passenger’s side exhaust crossover tube. Precision CNC-machined DOM steel tube spacers fit tightly to the factory exhaust flare joints which ensures no exhaust leaks while still maintaining adjustability. New hardware is included. The bolt-on design is completely reversible. This kit is a required accessory for JKS JK lift kits and is probably a critical add-on for other brands of suspension systems on the market where exhaust-to-driveshaft clearance is an issue.

CNC precision machined DOM steel tube spacers.
Provides clearance between front drive shaft and cross over tube.
Factory exhaust flare joints

The post JKS Jeep Wrangler JK 12-18 Exhaust Extension Kit first appeared on Camburg Engineering.

JKS Jeep Wrangler JK 07-18 3.5″ J-Konnect Suspension Kit

scott — Fri, 04 Jun 2021 17:02:53 +0000

For serious off-road use, step up to a JKS J-Konnect 3.5″ suspension system for your Wrangler JK. J-Konnect can tackle aggressive terrain including rocks and ruts without giving up street manners or breaking the bank. J-Konnect system takes suspension component strength and suspension geometry a step further by adding front and rear fixed-length J-Link lower control arms along with a drag link flip kit and track bar braces. In addition to being significantly stronger than factory control arms, J-LINK lower control arms add front caster and rear wheelbase. Built from 2” x .250-wall DOM tubing, J-LINK control arms provide street-friendly NVH isolation with large factory style rubber bushings at both ends. The drag link flip kit flattens the steering angle to mimic factory angles, while the track bar adds strength and protection. Combined with the matched dual-rate coil springs, custom-valved FOX Adventure Series monotube gas shocks, an adjustable track bar, Quicker Disconnect sway bar end links, and more. J-Konnect is ready for aggressive trail performance. Get connected with J-Konnect.

2012-2018 Models with 3.6L Pentastar motor will require exhaust modification for driveshaft clearance at full suspension droop, use JKS8150 exhaust extensions.

We also recommend upgrading to stainless steel-braided extended length brake lines with this kit.

The post JKS Jeep Wrangler JK 07-18 3.5″ J-Konnect Suspension Kit first appeared on Camburg Engineering.

JKS Jeep Wrangler JL 18-23 3.5″ J-Konnect Suspension Kit

scott — Fri, 04 Jun 2021 15:46:32 +0000

For serious off-road use, step up to a JKS J-Konnect 3.5″ suspension system for your 4-door Wrangler JK. J-Konnect can tackle aggressive terrain including rocks and ruts without giving up street manners or breaking the bank. J-Konnect system takes suspension component strength and suspension geometry a step further by adding front and rear fixed-length J-Link lower control arms along with a drag link flip kit and track bar braces. In addition to being significantly stronger than factory control arms, J-LINK lower control arms add front caster and rear wheelbase. Built from 2” x .250-wall DOM tubing, J-LINK control arms provide street-friendly NVH isolation with large factory style rubber bushings at both ends. The drag link flip kit flattens the steering angle to mimic factory angles, while the track bar adds strength and protection. Combined with the matched dual-rate coil springs, custom-valved FOX 2.0 Performance Series monotube gas shocks, an adjustable track bar, Quicker Disconnect sway bar end links, and more. J-Konnect is ready for aggressive trail performance. Get connected with J-Konnect.

We also recommend upgrading to our Camburg stainless steel-braided extended length brake lines with this kit.

The post JKS Jeep Wrangler JL 18-23 3.5″ J-Konnect Suspension Kit first appeared on Camburg Engineering.

JKS Jeep Wrangler JL 18-23 2.5″ J-Konnect Suspension Kit

scott — Thu, 03 Jun 2021 22:51:41 +0000

For serious off-road use, step up to a JKS J-Konnect 2.5″ suspension system for your Wrangler JK. J-Konnect can tackle aggressive terrain including rocks and ruts without giving up street manners or breaking the bank. J-Konnect system takes suspension component strength and suspension geometry a step further by adding front and rear fixed-length J-Link lower control arms along with a drag link flip kit and track bar braces. In addition to being significantly stronger than factory control arms, J-LINK lower control arms add front caster and rear wheelbase. Built from 2” x .250-wall DOM tubing, J-LINK control arms provide street-friendly NVH isolation with large factory style rubber bushings at both ends. The drag link flip kit flattens the steering angle to mimic factory angles, while the track bar adds strength and protection. Combined with the matched dual-rate coil springs, custom-valved FOX 2.0 Performance Series monotube gas shocks, an adjustable track bar, Quicker Disconnect sway bar end links, and more. J-Konnect is ready for aggressive trail performance. Get connected with J-Konnect.

Smaller 2-door Wranglers are lifted slightly higher to 3″

We also recommend upgrading to our Camburg stainless steel-braided extended length brake lines with this kit.

The post JKS Jeep Wrangler JL 18-23 2.5″ J-Konnect Suspension Kit first appeared on Camburg Engineering.

JKS Jeep Gladiator JT 20-23 3″ J-Venture Suspension Kit

scott — Thu, 03 Jun 2021 20:52:26 +0000

Increase your Jeep Gladiator JT’s ground clearance, tire clearance and performance with the JKS 3″ J-Venture suspension system. This complete, bolt-on kit includes matched JSPEC dual-rate coil springs, custom-valved FOX 2.0 IFP Performance Series monotube gas shocks, front adjustable track bar, front sway bar Quicker Disconnects w/ retention brackets, bump stop extensions, extended length rear sway bar links and front caster cam locks. From the factory the Gladiator has a bit of rake, with the front end sitting lower. JKS went to great lengths to develop JT-specific springs to level out the ride height. On the street, J-Venture provides exceptional ride quality and handling. When the road ends, disconnect your sway bar end links for improved articulation. That makes J-Venture the perfect entry-level performance suspension system. J-Venture delivers equal parts on-road handling and off-road use with low maintenance in mind. This particular part number features lightweight aluminum FOX 2.0 IFP Performance Series Shocks. They deliver quick, precise compression and rebound response with improved road manners.

We also recommend upgrading to our Camburg stainless steel-braided extended length brake lines with this kit.

The post JKS Jeep Gladiator JT 20-23 3″ J-Venture Suspension Kit first appeared on Camburg Engineering.