Description
Our FOX 3.0 DSC Performance kit for the ’21-23 Bronco’s takes our FOX 2.5 kit to the next level. We utilize FOX’s 3.0 Factory Series internal bypass front coilovers with DSC compression adjusters. This uses FOX’s patented internal bypass design which offers damping progression as they are position sensitive. You have considerably more bottoming control with a plush ride. They have a substantial increased oil capacity due to their size and have a lot more control and damping. The DSC compression adjuster allows you to tune the shock softer and firmer depending on what you’re looking for and how you’re using the truck. This combination of parts not only improves the ride and handling on-road but more so off-road. With our upper control arms these coilovers increase wheel travel and articulation. These also have FOX’s finned aluminum reservoirs with dual recirculating reservoir lines that aid in lowering shock temps under hard use.
- Improved ride both on and off-road
- Eliminates weak upper ball-joint
- Increased wheel travel
- Corrected suspension geometry
- Made in the USA
After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our upper arms address these issues and more. You can choose between our tubular and billet uniball arms depending on your budget and type of use. We’re able to increase wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We also engineered the arms with more caster and changed the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling both on and off-road. For more info on all our arms, check out their individual product pages to help make your choice.
In the rear we go with a pair of FOX’s 3.0 Factory Series internal bypass coilovers with DSC compression adjusters. This uses FOX’s patented internal bypass design which offers damping progression as they are position sensitive. You have considerably more bottoming control with a plush ride. They have a substantial increased oil capacity due to their size and have a lot more control and damping. The DSC compression adjuster allows you to tune the shock softer and firmer depending on what you’re looking for and how you’re using the truck. Since they are longer in length they increase rear wheel travel and articulation. These also have FOX’s finned aluminum piggyback reservoirs with recirculating oil that aids in lowering shock temps under hard use.
As an upgrade we recommend one of our rear lower trailing arm kits. They’re considerably stronger, pivot on 1″ uniball bearings for more wheel travel and articulation and increase ground clearance.
This kit is for the serious off-roader looking for the biggest and best parts out there.
- Does not fit the Bronco Raptor
For more detailed info on all these parts, check out their individual product pages by clicking on the links below …
- FOX 3.0 Factory Series Front Coilovers
- FOX 3.0 Factory Series Rear Coilovers
- Camburg Upper Control Arms | Billet Uniball | Uniball
Front
- 2-door: w/ Sasquatch Package = 3.5″ lift | w/o Sasquatch Package = 4.5″ lift
- 4-door: w/ Sasquatch Package = 3″ lift | w/o Sasquatch Package = 4″ lift
Rear
- 2-door: w/ Sasquatch Package = 2.5″ lift | w/o Sasquatch Package = 3.5″ lift
- 4-door: w/ Sasquatch Package = 2″ lift | w/o Sasquatch Package = 3″ lift
